Product Details

Bently Nevada provides good Condition Monitoring and Machine Asset Protection. Power Supply, CPU, I/O Modules, Proximitor Sensor and Programming cable of 3500/33 are supplied.

Product Introduction

Bently Nevada 330102-00-40-10-01-05 3300 XL 8 mm Proximity Probe 100% New 100% New

Brand：Bently Nevada

Item No.：330102-00-40-10-01-05

Product Type：3300 XL 8 mm Proximity Probe

Product Origin：USA

Dimensions：1m

Weight：0.323 kg

Payment：T/T, Western Union, Credit Card

Shipping Port：Xiamen, China

Lead Time：1-3 Days

Condition：Brand New And Original

Warranty：1 Year

This product is imported from overseas, supports test report assistance, and smooth after-sales docking

There are abundant spot models, supporting quick docking of purchasing needs, welcome to inquire!

Product FAQs

We've listed some product-related issues below. If you need further information or technical support, please contact us via email or by submitting a form. We'll get back to you as soon as possible!

FAQ

What is the purpose of this probe?

A: It is a vibration and position displacement transducer. It measures the change in distance (gap) between the probe tip and a rotating shaft to monitor vibration (for predictive maintenance) and axial position (for machinery protection) in turbomachinery like turbines, compressors, and pumps.

What is the required target material for accurate measurement?

A: For proper operation and calibration, the target surface must be made of a ferrous material, specifically AISI 4140 steel or an equivalent material like 420 series stainless steel.

Can the integral cable be repaired or replaced if damaged?

A: No, the cable is permanently attached and sealed within the probe body. If the cable is damaged, the entire probe assembly must be replaced to ensure integrity and performance.

How is the probe installed and secured in the machinery?

A: It is threaded into a mounting bracket or a hole directly in the machine case. A specific installation tool (or a locknut wrench) is required to tighten the hex body and secure it at the correct depth without damaging the probe.

Why is a gap voltage reading crucial during installation?
A: The gap voltage (or probe DC output) is a direct indicator of the average distance between the probe tip and the shaft. Setting it within the recommended range (typically -10 V to -12 V) ensures the shaft is centered within the probe’s linear measurement range for accurate AC (vibration) and DC (position) readings.

Is this probe compatible with monitors from other manufacturers?

A: While it may physically connect and provide a signal, its output is specifically calibrated for use with Bently Nevada’s 3300 XL and compatible system monitors. Using it with other systems may require custom calibration and could void warranties. For optimal performance and API compliance, use with recommended Bently Nevada hardware.

What is the difference between this probe and an extension cable?

A: This is the actual sensor (transducer). An extension cable is a separate component used to bridge the distance between this probe’s connector and the monitoring system, allowing for longer runs without having a prohibitively long and fragile probe assembly.

What environmental factors can affect its performance?

A: Performance can be adversely affected by extreme temperatures beyond its rating, contamination of the probe tip or target surface by oil, grease, or other debris, and strong electromagnetic or radio frequency interference (EMI/RFI) near the cable or probe.