Product Details

Bently Nevada provides good Condition Monitoring and Machine Asset Protection. Power Supply, CPU, I/O Modules, Proximitor Sensor and Programming cable of 3500/33 are supplied.

Product Introduction

Bently Nevada 330101-00-75-10-02-00 3300 XL 8 mm Proximity Probe Fast Shipping!

Brand：Bently Nevada

Item No.：330101-00-75-10-02-00

Product Type：3300 XL 8 mm Proximity Probe

Product Origin：USA

Dimensions：1.0 meter

Weight：0.323 kg

Payment：T/T, Western Union, Credit Card

Shipping Port：Xiamen, China

Lead Time：1-3 Days

Condition：Brand New And Original

Warranty：1 Year

Original overseas introduction, testing assistance instructions support, stable and reliable service

Wide coverage of models, efficient delivery, welcome to contact us for information!

Product FAQs

We've listed some product-related issues below. If you need further information or technical support, please contact us via email or by submitting a form. We'll get back to you as soon as possible!

FAQ

Is this proximity probe compatible with older systems?
Yes, the 3300 XL 8 mm system is both electrically and physically compatible with non-XL 3300 5 mm and 8 mm systems.

Can this product operate in high-temperature environments?
The standard probe supports up to +177°C. For higher temperatures, an Extended Temperature Range (ETR) probe and cable are available.

What is the recommended gap setting?
The recommended gap voltage is -9 Vdc, corresponding to a physical gap of approximately 1.27 mm (50 mils).

What are the typical applications for this probe?
It is typically used for vibration and position measurements on fluid-film bearing machines, and for Keyphasor and speed monitoring.

What components are included in a 1-meter system?
A 1-meter system includes the probe and Proximitor sensor only; it does not use an extension cable.

Is field calibration required?
No. The system components are fully interchangeable and do not require individual calibration.

Can the probe be used for overspeed protection applications?
Yes.

How is the pressure sealing of the probe achieved?
The probe uses a Viton® O-ring to seal the pressure between the probe tip and case