Bently Nevada 330103-00-05-10-02-00 3300 XL 8 mm Proximity Probe New In Stock

Frequently Asked Questions (FAQ)

What is the purpose of the 330103-00-05-10-02-00 probe?
It is used for non-contact vibration and position measurements in rotating machinery, particularly with fluid-film bearings.

What is the typical gap voltage for installation?
The recommended gap corresponds to approximately -9 Vdc, which is about 1.27 mm (50 mils) from the target.

Is the probe compatible with other 3300 series systems?
Yes, it is both electrically and physically compatible with non-XL 3300 5 mm and 8 mm systems.

What is the linear measurement range of the probe?
2.0 mm (80 mils), effective from 0.25 mm to 2.3 mm.

Can it withstand high temperature environments?
Yes, the standard probe operates up to +177°C, and the ETR variant can operate up to +218°C.

Is special tooling required to install the ClickLoc connector?
No, the ClickLoc connector is designed for tool-free finger-tight installation.

What is the expected performance accuracy?
±5% scale factor deviation and ±0.025 mm DSL for 1 m systems.

What shaft size is recommended for optimal performance?
A minimum shaft diameter of 76.2 mm (3.0 in) is recommended to minimize cross-talk.