Honeywell FC-GMLA16 16ch AI 4-20mA FTA Single Channel CC 12-Month Warranty

FAQ

How can I confirm the 16-channel AI module is working properly?
Read the 4-20 mA input signals on each channel, verify the output current corresponds to settings, and check that communication interface data is correct.

What input signal types does the module support?
The module supports standard 4-20 mA analog signals only; other current or voltage signals are not supported.

What should I do if the output current is abnormal?
Check that input signals are properly connected, ensure stable power supply, and verify module configuration parameters.

Does the module support remote monitoring?
Yes, it can be monitored in real time via the Modbus RTU interface connected to a control system.

Can the module operate correctly in high-temperature environments?
The module operates between 0°C and 50°C. Exceeding this range may affect accuracy or trigger protective mechanisms.

How is the module initialized or reset?
It can be reset via a command from the control system or by power cycling the module.

Does the module support single-channel output adjustment?
Yes, each channel can independently control its output current for system flexibility.

Does the communication interface require special configuration?
When using the Modbus RTU interface, the correct slave address, baud rate, and data format must be set to match the master control system.