Bently Nevada 330171-24-32-20-02-05 3300 Series 5 mm Eddy‑Current Proximity Probe Trusted supplier

FAQ

What is the primary purpose of the 330171‑24‑32‑20‑02‑05 proximity probe?
It is used to measure shaft vibration, axial position, and displacement in rotating machinery.

What does the “330171” series represent?
It identifies a 3300 Series 5 mm eddy‑current proximity probe designed for industrial condition monitoring.

What does the “24‑32‑20‑02‑05” configuration indicate?
It specifies a 24 mm unthreaded length, a 32 mm probe body length, a 2.0 m integral cable, a ClickLoc connector, and hazardous area approvals.

Which monitoring systems are compatible with this probe?
The probe is compatible with Bently Nevada 3300 XL Proximitor Sensors and associated monitoring modules.

Can this probe be used in harsh or hazardous industrial environments?
Yes, the stainless‑steel housing and multiple agency approvals make it suitable for harsh, high‑vibration, and regulated installations.

What type of output signal does this probe provide?
It provides an analog voltage output proportional to the measured shaft displacement or vibration.

What is the operating temperature range of this proximity probe?
The probe operates reliably from –35 °C to +177 °C.

What are the physical dimensions and weight of this probe?
The probe has a 5 mm tip diameter, a 32 mm body length, a 24 mm unthreaded section, a 2.0 m cable, and weighs approximately 0.45 kg.