Product Details

Bently Nevada provides good Condition Monitoring and Machine Asset Protection. Power Supply, CPU, I/O Modules, Proximitor Sensor and Programming cable of 3500/33 are supplied.

Product Introduction

Bently Nevada 3500/62-01-00 136499-01 Process Variable Monitor I/O Module Unbelievable Prices!

Brand：Bently Nevada

Item No.：3500/62-01-00 136499-01

Product Type：I/O Module

Product Origin：USA

Dimensions：241.3 x 24.4 x 99.1 mm

Weight：0.20 kg

Payment：T/T, Western Union, Credit Card

Shipping Port：Xiamen, China

Lead Time：1-3 Days

Condition：Brand New And Original

Warranty：1 Year

Standardized import process, support for testing, guaranteed after-sales

Ten thousand models in stock, quickly match needs, welcome to call for cooperation!

Product FAQs

We've listed some product-related issues below. If you need further information or technical support, please contact us via email or by submitting a form. We'll get back to you as soon as possible!

FAQ (Frequently Asked Questions)

What types of signals can the 3500/62-01-00 I/O Module process?
This module processes analog voltage signals in the range of -10 Vdc to +10 Vdc.

Does this module support current inputs like 4-20 mA?
No, the 3500/62-01-00 (part number 136499-01) specifically supports ±10 Vdc voltage inputs. For 4-20 mA inputs, other model variants must be used.

What is the input impedance for voltage measurements?
The input impedance for ±10 Vdc input is 1 MΩ, ensuring minimal load on the measured circuit.

How accurate are the signal readings on this module?
Accuracy is typically within ±0.33% of full scale and not worse than ±1%.

Is the I/O module hot-swappable?
No, the module is not hot-swappable. Power should be turned off during installation or removal to ensure safety.

What are the LED indicators used for on the front panel?
The front panel has three LEDs: OK (module health), TX/RX (communication status), and Bypass (bypass mode active).

Can this module be used in hazardous area installations?
Yes, it supports hazardous area certifications including ATEX and CSA when installed per the specified drawings and with appropriate barriers.

What is the minimum signal span for proper voltage measurement?
The minimum required signal span for voltage input is 2 Volts, to ensure accurate scaling and alarm setting.